ford f150 Tire Pressure Sensor Fault [How to Reset]

tire pressure sensor fault f150

One of the most important aspects of running a car is keeping the tires properly inflated. A simple tire pressure sensor fault could be indicative of something more serious, but luckily it’s easy to diagnose. In the rest of this post we will tell you the possible causes and solutions to this fault, Read on.

What is a Tire Pressure Sensor?

A tire pressure sensor is an electronic device that is installed on your vehicle. The purpose of the tire pressure sensors is to monitor the air pressure in your tires and alert you when there is a problem with the air pressure.

Tire pressure sensors are becoming increasingly popular on new vehicles because they allow drivers to detect problems before they become too severe. This can help prevent accidents and extend your tires’ life. Tire pressure sensors are also known as TPMS (tire pressure monitoring systems).

What Does it Mean if a Ford F150 Displays “Tire Sensor Fault”?

Tire sensor fault is a common message that appears on the cluster of your  F150. It’s a warning that something may be wrong with your tires. Tire pressure sensors are located in each of your tires.

They monitor the air pressure in your tires and send information to your vehicle’s computer about how much air is in each tire. If one or more of the sensors stop working, it can cause a tire pressure indicator light to appear on your dash. When you get this message, here are some things you should do:

  1.  Check all four tires for damage. If any tire has a bulge or puncture, have it repaired immediately by an experienced technician.
  2. Check all four tires for uneven wear patterns or cracking around the edges of the treads (known as “cupping”). This type of damage can indicate overinflation or underinflation, which can cause poor handling and poor fuel economy.
  3. If you see signs of underinflation or cupping on one rear tire, check all four tires for similar problems before driving your pickup again.

What are the main causes of Tire Sensor fault on a ford f150?

There are several reasons why your Ford F150 could be showing a tire pressure sensor fault on the dash. Here are some of the reasons:

1. Faulty Tire Pressure Sensor

The tire pressure sensor is an electronic device that monitors the air pressure in your tires. It sends a signal to the onboard computer, which then displays the tire pressure on the dashboard. If one of these sensors malfunctioning or has failed, you may see a low tire pressure warning light on your dash.

2. Tire pressure sensor lost memory

If your vehicle has been sitting for a while, it’s normal for some of its systems to lose power. This includes the TPMS system as well. As soon as you start up your car again, all of these systems will automatically reset themselves and retune themselves back into working order. If this does not happen, then you may have a faulty TPMS system that requires replacement

3. You changed wheels

If you’ve recently swapped out your stock rims for aftermarket ones, then this can cause problems with your TPMS system. Aftermarket rims don’t always have the same mounting pattern as stock ones do (even if they look identical). This means that they might not be compatible with your car’s built-in sensors.

Can You Drive with a Tire Pressure Sensor Fault?

Driving with a tire pressure monitoring system (TPMS) sensor fault can lead to serious safety problems. A TPMS warning light may illuminate on your dashboard, indicating that air pressure is low, or that one or more of your tires has been damaged.

If you have a TPMS sensor fault and continue to drive, you risk severe tire damage or even blowouts that could cause an accident. You should never drive with a TPMS sensor fault. If you notice the warning light illuminated on your dashboard and you are unsure what it means, pull over as soon as it is safe to do so and tow your car to a trusted technician for an inspection as soon as possible.

How do you reset the tire pressure sensor on a Ford f150?

The following procedure will reset the tire pressure sensor in a Ford F150.

  1. Turn on the ignition and make sure that your truck is in Park or Neutral.
  2. Press and hold the brake pedal for about two seconds, then release it when you hear a chime.
  3. Within 20 seconds of releasing the brake pedal, press and hold the accelerator pedal for about two seconds, then release it when you hear another chime.

This process will allow you to reset the sensor so that it can read your tire pressure again. If you have any isues with this process or if it does not work, please contact your dealer or a qualified mechanic immediately.

Closing Thoughts

When it comes to a Ford f-150, you might have to face certain common issues such as tire pressure sensor fault. As a competent driver, there are some basic things you should know about the tire pressure that would stop bothering you all the time when it comes to your car.



Recent Posts